View ECA1CM472_7786980.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ m 10 < d 0.05 sleeve 14 min. 3min. l ? 6.3 < ? l < 1 6:l 1.0 l > 2 0:l 2.0 pressure relief + 4to 8 d+0.5 f 0.5 d+0.5 features endurance : 85 c 2000 h smaller than series su rohs directiv e compliant radial lead type series: m type: a speci? cations category temp. range 40 c to + 85 c 25 c to +85 c rated w.v. range 6.3 v.dc to 10 0 v.dc 160 v.dc to 450 v.dc nominal cap. range 0 .1 f to 22000 f 1 f to 470 f capacitance tolerance 20 % (120 hz/+20 c) dc leak age cur rent i < 0.01 cv or 3 (a) after 2 minutes (whichever is greater) i < 0.06 cv +10 (a) after 2 minutes tan please see the attached standard products list endurance after applying rated working voltage for 2000 hours at +85c2 c, when the capacitors are restored to 20 ?, capacitors shall meet the following limits. capacitance change 20 % of initial measured value tan < 150 % of initial speci ed value dc leakag e current < initial speci ed value shelf life after storage for 1000 hours at +85 c2 c with no voltage applied and then being stabilized at +2 0 c, capacitors shall meet the limits speci ed in endurance. (with voltage treatment) di men sions in mm (not to scale) (mm) body dia. d5 6.3 8 1012.516 18 lead dia. d0.50.50 .6 0.6 0.6 0.8 0.8 lead space f 2.0 2.5 3.5 5.0 5.0 7.5 7.5 [mm] mar. 2008 free datasheet http:///
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ m standard prod ucts w.v. cap. (20 %) case size speci cation lead length part no. min. packaging q'ty dia. length ripple current (120 hz) (+85 c ) tan (120 hz) (+20 c) lead dia. lead space straight leads taping straight taping ? b taping ? i (v) (?) ( mm) (mm) (ma r.m.s.) (mm) (mm) (mm) (mm) (pcs) (pcs) 6.3 220 5 11 240 0.28 0 .5 2.0 5 .0 2.5 eca0jm221( ) 200 2 000 470 6.3 11.2 380 0.28 0.5 2.5 5.0 2.5 eca0jm471( ) 200 2 000 1 000 8 11.5 580 0. 28 0.6 3.5 5.0 eca0jm102( ) 200 1 000 2200 10 16 890 0.30 0.6 5.0 5.0 eca0jm 222( ) 200 500 3300 10 20 1020 0. 32 0.6 5 .0 5.0 eca0jm332( ) 200 500 4700 12.5 20 1170 0.34 0.6 5.0 5.0 eca0jm472( ) 200 500 6800 12.5 25 1270 0. 38 0.6 5 .0 5.0 eca0jm682( ) 200 500 1 0000 16 25 1450 0.46 0.8 7.5 7.5 eca0jm103( ) 100 250 15 000 16 31.5 1700 0.56 0.8 7.5 eca0jm153 100 22 000 18 35.5 1900 0.70 0.8 7.5 eca0jm223 50 10 330 6.3 11.2 330 0.24 0.5 2.5 5.0 2.5 eca1am331( ) 200 2 000 1 000 10 12.5 630 0.24 0.6 5.0 5.0 eca1am102( ) 200 500 2200 10 20 920 0.26 0.6 5.0 5.0 eca1am 222( ) 200 500 3300 12.5 20 1090 0.28 0.6 5.0 5.0 eca1am332( ) 200 500 4700 12.5 25 1200 0. 30 0.6 5 .0 5.0 eca1am472( ) 200 500 6800 16 25 14 00 0.34 0.8 7.5 7.5 eca1am682( ) 100 250 1 0000 16 31.5 1600 0.42 0.8 7.5 eca1am103 100 15000 18 35.5 1850 0.52 0.8 7.5 eca1am153 50 16 10 5 11 30 0.20 0 .5 2.0 5 .0 2.5 eca1cm100( ) 200 2 000 22 5 11 75 0.20 0 .5 2.0 5 .0 2.5 eca1cm220( ) 200 2 000 33 5 11 110 0.20 0.5 2.0 5.0 2.5 eca1cm330( ) 200 2 000 47 5 11 130 0.20 0.5 2.0 5.0 2.5 eca1cm470( ) 200 2 000 100 5 11 180 0.20 0 .5 2.0 5 .0 2.5 eca1cm101( ) 200 2 000 220 6.3 11.2 280 0.20 0.5 2.5 5.0 2.5 eca1cm221( ) 200 2 000 470 8 11.5 440 0.20 0.6 3.5 5.0 eca1cm471( ) 200 1 000 1 000 10 16 680 0.20 0.6 5.0 5.0 eca1cm102( ) 200 500 2200 12.5 20 1 000 0.22 0.6 5.0 5.0 eca1cm 222( ) 200 500 3300 12.5 25 1200 0. 24 0.6 5 .0 5.0 eca1cm332( ) 200 500 4700 16 25 1360 0. 26 0.8 7.5 7.5 ECA1CM472( ) 100 250 6800 16 31 .5 1600 0. 30 0.8 7.5 eca1cm682 100 1 0000 18 35.5 1800 0.38 0.8 7.5 eca1cm103 50 25 100 6.3 11.2 180 0.1 60.5 2.5 5 .0 2.5 eca1em101( ) 200 2 000 330 8 11.5 390 0.16 0.6 3.5 5.0 eca1em331( ) 200 1 000 470 10 12.5 480 0. 16 0.6 5 .0 5.0 eca1em471( ) 200 500 1 000 10 20 850 0.16 0.6 5.0 5.0 eca1em102( ) 200 500 2200 12.5 25 1200 0. 18 0.6 5 .0 5.0 eca1em 222( ) 200 500 3300 16 25 1300 0. 20 0.8 7.5 7.5 eca1em332( ) 100 250 4700 16 31.5 15 00 0.22 0.8 7.5 eca1em472 100 6800 18 35.5 17 50 0.26 0.8 7.5 eca1em682 50 35 47 5 11 130 0.14 0.5 2.0 5.0 2.5 eca1vm470( ) 200 2 000 100 6.3 11.2 210 0.1 40.5 2.5 5 .0 2.5 eca1vm101( ) 200 2 000 220 8 11.5 350 0.14 0.6 3.5 5.0 eca1vm221( ) 200 1 000 endurance : 85 ? 2000 h when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch b=5 mm, 7.5 mm, i=2.5 mm. the taping dimensions are explained on p.178 of our catalog. please use it as a reference guide. jul. 2008 free datasheet http:///
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ m standard prod ucts w.v. cap. (20 %) case size speci cation lead length part no. min. packaging q'ty dia. length ripple current (120 hz) (+85 c ) tan (120 hz) (+20 c) lead dia. lead space straight leads taping straight taping ? b taping ? i (v) (?) ( mm) (mm) (ma r.m.s.) (mm) (mm) (mm) (mm) (pcs) (pcs) 35 330 10 12.5 440 0. 14 0.6 5 .0 5.0 eca1vm331( ) 200 500 470 10 16 550 0. 14 0.6 5 .0 5.0 eca1vm471( ) 200 500 1 000 12.5 20 900 0.14 0.6 5.0 5.0 eca1vm102( ) 200 500 2200 16 25 1250 0. 16 0.8 7.5 7.5 eca1vm 222( ) 100 250 3300 16 31.5 14 00 0.18 0.8 7.5 eca1vm332 100 4700 18 35.5 16 00 0.20 0.8 7.5 eca1vm472 50 50 0.1 5 11 1.3 0.12 0.5 2.0 5.0 2.5 eca1hm0r1( ) 200 2 000 0.22 5 11 2.9 0.12 0.5 2.0 5.0 2.5 eca1hmr22( ) 200 2 000 0.33 5 11 4.4 0.12 0.5 2.0 5.0 2.5 eca1hmr33( ) 200 2 000 0.47 5 11 5 0.12 0.5 2.0 5.0 2.5 eca1hmr47( ) 200 2 000 15 11 100. 12 0.5 2 .0 5.0 2.5 eca1hm010( ) 200 2 000 2.2 5 11 20 0.12 0.5 2.0 5.0 2.5 eca1hm2r2( ) 200 2 000 3.3 5 11 35 0.12 0.5 2.0 5.0 2.5 eca1hm3r3( ) 200 2 000 4.7 5 11 45 0.12 0.5 2.0 5.0 2.5 eca1hm4r7( ) 200 2 000 10 5 11 65 0.12 0 .5 2.0 5 .0 2.5 eca1hm100( ) 200 2 000 22 5 11 100 0.12 0.5 2.0 5.0 2.5 eca1hm220( ) 200 2 000 33 5 11 110 0.12 0.5 2.0 5.0 2.5 eca1hm330( ) 200 2 000 47 6.3 11.2 130 0. 12 0.5 2.5 5.0 2.5 eca1hm470( ) 200 2 000 100 8 11.5 250 0.12 0.6 3.5 5.0 eca1hm101( ) 200 1 000 220 10 12.5 400 0. 12 0.6 5 .0 5.0 eca1hm221( ) 200 500 330 10 16 500 0. 12 0.6 5 .0 5.0 eca1hm331( ) 200 500 470 10 20 650 0. 12 0.6 5 .0 5.0 eca1hm471( ) 200 500 1 000 12.5 25 1050 0. 12 0.6 5 .0 5.0 eca1hm102( ) 200 500 2200 16 31.5 13 00 0.14 0.8 7.5 eca1 hm222 100 3300 18 35.5 15 00 0.16 0.8 7.5 eca1hm332 50 63 10 5 11 70 0.11 0 .5 2.0 5 .0 2.5 eca1jm100( ) 200 2 000 22 5 11 105 0.11 0.5 2.0 5.0 2.5 eca1jm220( ) 200 2 000 33 6.3 11.2 130 0. 11 0.5 2.5 5.0 2.5 eca1 jm330( ) 200 2 000 47 6.3 11.2 160 0. 11 0.5 2.5 5.0 2.5 eca1jm470( ) 200 2 000 100 8 11.5 270 0.11 0.6 3.5 5.0 eca1jm101( ) 200 1 000 220 10 16 450 0. 11 0.6 5 .0 5.0 eca1jm221( ) 200 500 330 10 20 550 0. 11 0.6 5 .0 5.0 eca1 jm331( ) 200 500 470 12.5 20 750 0. 11 0.6 5 .0 5.0 eca1jm471( ) 200 500 1 000 16 25 1100 0.11 0.8 7.5 7.5 eca1jm102( ) 100 250 2200 18 35.5 14 00 0.13 0.8 7.5 eca1 jm222 50 100 0.47 5 11 10 0.10 0.5 2.0 5.0 2.5 eca2amr47( ) 200 2 000 15 11 200. 10 0.5 2 .0 5.0 2.5 eca2am010( ) 200 2 000 2.2 5 11 30 0.10 0.5 2.0 5.0 2.5 eca2am2r2( ) 200 2 000 3.3 5 11 40 0.10 0.5 2.0 5.0 2.5 eca2am3r3( ) 200 2 000 4.7 5 11 50 0.10 0.5 2.0 5.0 2.5 eca2am4r7( ) 200 2 000 10 5 11 70 0.10 0 .5 2.0 5 .0 2.5 eca2am100( ) 200 2 000 22 6.3 11.2 115 0. 10 0.5 2.5 5.0 2.5 eca2am220( ) 200 2 000 endurance : 85 ? 2000 h when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch b=5 mm, 7.5 mm, i=2.5 mm. the taping dimensions are explained on p.178 of our catalog. please use it as a reference guide. jul. 2008 free datasheet http:///
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ m standard prod ucts w.v. cap. (20 %) case size speci cation lead length part no. min. packaging q'ty dia. length ripple current (120 hz) (+85 c ) tan (120 hz) (+20 c) lead dia. lead space straight leads taping straight taping ? b taping ? i (v) (?) ( mm) (mm) (ma r.m.s.) (mm) (mm) (mm) (mm) (pcs) (pcs) 100 33 8 11.5 145 0. 10 0.6 3.5 5.0 eca2am330( ) 200 1 000 47 8 11.5 180 0. 10 0.6 3.5 5.0 eca2am470( ) 200 1 000 100 10 16 350 0. 10 0.6 5 .0 5.0 eca2am101( ) 200 500 220 12.5 20 550 0. 10 0.6 5 .0 5.0 eca2am221( ) 200 500 330 12.5 25 700 0. 10 0.6 5 .0 5.0 eca2am331( ) 200 500 470 16 25 900 0. 10 0.8 7.5 7.5 eca2am471( ) 100 250 1 000 18 35.5 1300 0.10 0.8 7.5 eca2am102 50 160 16.311.2 360.16 0.5 2.5 5.0 2.5 eca2cm010( ) 200 2 000 2.2 6.3 11.2 53 0. 16 0.5 2.5 5.0 2.5 eca2cm2r2( ) 200 2 000 3.3 6.3 11.2 66 0. 16 0.5 2.5 5.0 2.5 eca2cm3r3( ) 200 2 000 4.7 6.3 11.2 78 0.16 0.5 2.5 5.0 2.5 eca2cm4r7( ) 200 2 000 10 10 12.5 105 0.16 0.6 5.0 5.0 eca2cm100( ) 200 500 22 10 16 175 0.16 0.6 5.0 5.0 eca2cm220( ) 200 500 33 10 20 235 0.16 0.6 5.0 5.0 eca2cm330( ) 200 500 47 12.5 20 320 0.16 0.6 5.0 5.0 eca2cm470( ) 200 500 100 12.5 25 515 0. 16 0.6 5 .0 5.0 eca2cm101( ) 200 500 220 16 31.5 830 0.16 0.8 7.5 eca2cm221 100 330 18 31.5 1090 0.16 0.8 7.5 eca2cm331 50 470 18 40 1440 0.16 0.8 7.5 eca2cm471 50 200 16.311.2 340.18 0.5 2.5 5.0 2.5 eca2dm010( ) 200 2 000 2.2 6.3 11.2 50 0. 18 0.5 2.5 5.0 2.5 eca2dm2r2( ) 200 2 000 3.3 6.3 11.2 62 0. 18 0.5 2.5 5.0 2.5 eca2dm3r3( ) 200 2 000 4.7 8 11.5 86 0.18 0.6 3.5 5.0 eca2dm4r7( ) 200 1 000 10 10 12.5 100 0.18 0.6 5.0 5.0 eca2dm100( ) 200 500 22 10 20 180 0.18 0.6 5.0 5.0 eca2dm220( ) 200 500 33 10 20 220 0.18 0.6 5.0 5.0 eca2dm330( ) 200 500 47 12.5 20 300 0.18 0.6 5.0 5.0 eca2dm470( ) 200 500 100 16 25 475 0. 18 0.8 7.5 7.5 eca2dm101( ) 100 250 220 18 31.5 835 0.18 0.8 7.5 eca2dm221 50 330 18 40 1140 0.18 0.8 7.5 eca2dm331 50 250 16.311.2 340.18 0.5 2.5 5.0 2.5 eca2em010( ) 200 2 000 2.2 6.3 11.2 50 0. 18 0.5 2.5 5.0 2.5 eca2em2r2( ) 200 2 000 3.3 8 11.5 72 0. 18 0.6 3.5 5.0 eca2em3r3( ) 200 1 000 4.7 8 11.5 86 0.18 0.6 3.5 5.0 eca2em4r7( ) 200 1 000 10 10 16 110 0.18 0.6 5.0 5.0 eca2em100( ) 200 500 22 10 20 180 0.18 0.6 5.0 5.0 eca2em220( ) 200 500 33 12.5 20 250 0.18 0.6 5.0 5.0 eca2em330( ) 200 500 47 12.5 25 330 0.18 0.6 5.0 5.0 eca2em470( ) 200 500 100 16 31.5 530 0.18 0.8 7.5 eca2em101 100 220 18 40 930 0.18 0.8 7.5 eca2em221 50 350 16.311.2 320.20 0.5 2.5 5.0 2.5 eca2vm010( ) 200 2 000 2.2 8 11.5 55 0. 20 0.6 3.5 5.0 eca2vm2r2( ) 200 1 000 endurance : 85 ? 2000 h when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch b=5 mm, 7.5 mm, i=2.5 mm. the taping dimensions are explained on p.178 of our catalog. please use it as a reference guide. jul. 2008 free datasheet http:///
design and speci? cations are each subject to change without notice. ask factory for the current technical speci? cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ m w.v. cap. (20 %) case size speci cation lead length part no. min. packaging q'ty dia. length ripple current (120 hz) (+85 c ) tan (120 hz) (+20 c) lead dia. lead space straight leads taping straight taping ? b taping ? i (v) (?) ( mm) (mm) (ma r.m.s.) (mm) (mm) (mm) (mm) (pcs) (pcs) 350 3.3 8 11.5 60 0. 20 0.6 3.5 5.0 eca2vm3r3( ) 200 1 000 4.7 10 12.5 65 0.20 0.6 5.0 5.0 eca2vm4r7( ) 200 500 10 10 20 115 0.20 0.6 5.0 5.0 eca2vm100( ) 200 500 22 12.5 20 195 0.20 0.6 5.0 5.0 eca2vm220( ) 200 500 33 16 25 300 0.20 0.8 7.5 7.5 eca2vm330( ) 100 250 47 16 25 325 0.20 0.8 7.5 7.5 eca2vm470( ) 100 250 100 18 31.5 535 0.20 0.8 7.5 eca2vm101 50 400 16.311.2 320.20 0.5 2.5 5.0 2.5 eca2gm010( ) 200 2 000 2.2 8 11.5 50 0. 20 0.6 3.5 5.0 eca2gm2r2( ) 200 1 000 3.3 10 12.5 54 0.20 0.6 5.0 5.0 eca2gm3r3( ) 200 500 4.7 10 16 72 0.20 0.6 5.0 5.0 eca2gm4r7( ) 200 500 10 10 20 115 0.20 0.6 5.0 5.0 eca2gm100( ) 200 500 22 12.5 25 215 0.20 0.6 5.0 5.0 eca2gm220( ) 200 500 33 16 25 275 0.20 0.8 7.5 7.5 eca2gm330( ) 100 250 47 16 31.5 350 0.20 0.8 7.5 eca2gm470 100 100 18 40 600 0.20 0.8 7.5 eca2gm101 50 450 18 11.5 370.20 0.6 3.5 5.0 eca2wm010( ) 200 1 000 2.2 10 12.5 44 0.20 0.6 5.0 5.0 eca2wm2r2( ) 200 500 3.3 10 16 60 0.20 0.6 5.0 5.0 eca2wm3r3( ) 200 500 4.7 10 20 79 0.20 0.6 5.0 5.0 eca2wm4r7( ) 200 500 10 12.5 20 130 0.20 0.6 5.0 5.0 eca2wm100( ) 200 500 22 16 25 210 0.20 0.8 7.5 7.5 eca2wm220( ) 100 250 33 16 31.5 285 0.20 0.8 7.5 eca2wm330 100 standard prod ucts endurance : 85 ? 2000 h when requesting taped product, please put the letter "b" or "i" between the "( )". lead wire pitch b=5 mm, 7.5 mm, i=2.5 mm. the taping dimensions are explained on p.178 of our catalog. please use it as a reference guide. jul. 2008 free datasheet http:///

▲Up To Search▲

Price & Availability of ECA1CM472

	To Download ECA1CM472 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .